How to get Redmi Note 9 test points
I would like to discuss the Redmi Note 9’s test points. Today’s topic will be how to flash the Redmi Note 9. We all face a problem when flashing the Redmi Note 9 phone. And that is the boot problem. The phone does not boot into the computer in any way. In that case, I have a lot of problems flashing or unlocking the lock. So today I will discuss.
What do we mean by test point?
By test point, we basically mean shorting two points with tweezers. These test points are marked by the company. When we work on those phones, we check on Google for the exact location of the test point.
How to boot the Redmi Note 9 phone?
There are a few things to keep in mind when flashing or unlocking phones of this quality. That is the phone’s CPU. (Its processor is the Halo G85.)Usually, CPUs at this level do not have test points. It may also be necessary in some cases. Now the question is how to boot if there is no test point? The answer is, when we used to flash old phones with an MTK CPU, there was no boot required. However, the SPD IC required a boot key. However, now, due to the continuous updates of the work of phone developers, these works are also being updated. At present, you will notice that all updated MTK phones have a test point system. But why isn’t it on the Redmi Note 9? The Redmi Note 9 also has it, but it’s on the volume button. To boot this phone, you need to press and hold the volume up and volume down buttons together. Then you will see that your Redmi Note 9 phone has completed booting.
Important Notice: Warning for Redmi Note 9 Test Point
Here are a few more things to keep in mind. You need to install the driver on your computer.I have given the driver the link. After that, hold down the volume up and down buttons together and connect it to the PC. You will see that the Redmi Note 9 has booted. Take a good look at the charging port. Then, understand and listen to flash or unlock the phone. You will see that it has become much easier. But if you go to work without understanding it, you won’t be able to get the job done. This will disappoint you. So I want to say that when flashing the Redmi Note 9, hold down the volume up and down buttons together and connect it to the PC.
